[c-nsp] 6509 port-channel logical interfaces

[Keegan Holley]

I need to add a port channel with L3 sub interfaces to a 6509 with a
SUP720.  Here's the code and a sh mod from the box.  This isn't explicitly
in the feature navigator.  Is this not supported at all or do I just need a
different code version or feature set.


s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH3a,
RELEASE SOFTWARE (fc1)



Mod Ports Card Type                              Model              Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B
  6    2  Supervisor Engine 720 (Hot)            WS-SUP720-3B


Mod  Sub-Module                  Model              Serial       Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
  1  Centralized Forwarding Card WS-F6700-CFC         4.1    Ok
  5  Policy Feature Card 3       WS-F6K-PFC3B        2.4    Ok
  5  MSFC3 Daughterboard         WS-SUP720           3.2    Ok
  6  Policy Feature Card 3       WS-F6K-PFC3B         2.4    Ok
  6  MSFC3 Daughterboard         WS-SUP720           3.2    Ok