[c-nsp] 6509 port-channel logical interfaces

Mack McBride mack.mcbride at viawest.com
Thu Oct 20 19:38:53 EDT 2011


You should probably upgrade code.
Yes L3 sub interfaces are supported but the entire port channel must be configured as a L3 interface to add sub-interfaces to it.

Mack McBride
Network Architect

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Keegan Holley
Sent: Thursday, October 20, 2011 5:20 PM
To: Cisco NSPs
Subject: [c-nsp] 6509 port-channel logical interfaces

I need to add a port channel with L3 sub interfaces to a 6509 with a
SUP720.  Here's the code and a sh mod from the box.  This isn't explicitly
in the feature navigator.  Is this not supported at all or do I just need a
different code version or feature set.


s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH3a,
RELEASE SOFTWARE (fc1)



Mod Ports Card Type                              Model              Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B
  6    2  Supervisor Engine 720 (Hot)            WS-SUP720-3B


Mod  Sub-Module                  Model              Serial       Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
  1  Centralized Forwarding Card WS-F6700-CFC         4.1    Ok
  5  Policy Feature Card 3       WS-F6K-PFC3B        2.4    Ok
  5  MSFC3 Daughterboard         WS-SUP720           3.2    Ok
  6  Policy Feature Card 3       WS-F6K-PFC3B         2.4    Ok
  6  MSFC3 Daughterboard         WS-SUP720           3.2    Ok
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list