[c-nsp] ZBFW and DHCP

[Scott Voll]

I have Zones for both inside self and outside self

Scott

On Mon, Sep 12, 2011 at 1:38 PM, Hughes, Scott GRE-MG
<SHughes at grenergy.com>wrote:

> Did you setup any zone-pairs involving the 'self' zone? If you don't use
> self zones, no additional configuration should be necessary for DHCP
> packets.
>
>
>
> On Sep 12, 2011, at 9:43 AM, "Scott Voll" <svoll.voip at gmail.com> wrote:
>
> > So I'm setting up a GRE IPSEC tunnel as my backup link with a 2821.  I
> have
> > also setup ZBFW on the outside interface.  So far so good.
> >
> > BUT now the outside interface will not get a DHCP address from the ISP.
>  How
> > do I allow the Router to get a DHCP address?  Did I miss something on the
> > ZBFW config?  Or can this not be done?
> >
> > TIA
> >
> > Scott
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> NOTICE TO RECIPIENT: The information contained in this message from
> Great River Energy and any attachments are confidential and intended
> only for the named recipient(s). If you have received this message in
> error, you are prohibited from copying, distributing or using the
> information. Please contact the sender immediately by return email and
> delete the original message.
>
>
>
>
>