[c-nsp] channelized ds3 - make a point to point?

Keegan Holley keegan.holley at sungard.com
Wed Apr 18 12:54:42 EDT 2012


The dsx panel isn't active so it wouldn't bundle a circuit for you.  Also,
there isn't a way (AFAIK) to hand off a T3 clear channel with 26 of the 28
timeslots as dead air.  You could bring it in on a more expensive box and
hand off ethernet with 2M of bandwidth, but that wouldn't be worth the
effort compared to just doing MLPPP.

2012/4/18 Mike <mike-cisconsplist at tiedyenetworks.com>

> On 04/18/2012 07:48 AM, Mike wrote:
>
>> Howdy,
>>
>>
>> I have two ds1's. The end points are two customer locations, while my
>> noc is in the middle. I was wondering if there is a cisco way to create
>> a clear channel ds1 connecting these two customer locations as if they
>> had a telco point to point ds1 between them? I have a 7201 with
>> pa-mc-2t3+.
>>
>>
> Sorry for replying to my own post, but I am asking if there's anyway to do
> in the adaptor like a dsx. Otherwise I'd have to bring both ds1's out to a
> real dsx, which is silly.
>
>
> Mike-
> ______________________________**_________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp>
> archive at http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/>
>
>


More information about the cisco-nsp mailing list