[c-nsp] channelized ds3 - make a point to point?

[Mike]

On 04/18/2012 09:54 AM, Keegan Holley wrote:
> The dsx panel isn't active so it wouldn't bundle a circuit for you.  
> Also, there isn't a way (AFAIK) to hand off a T3 clear channel with 26 
> of the 28 timeslots as dead air.  You could bring it in on a more 
> expensive box and hand off ethernet with 2M of bandwidth, but that 
> wouldn't be worth the effort compared to just doing MLPPP.
>

The issue is this:

     At present, I have a telco point to point circuit connecting 'a' 
and 'b' locations with cisco 1720's with T1 wic modules on each end. Due 
to immaterial reasons, it's now cheaper for me to have a point to point 
from 'A' to my noc, and 'B' to my noc, so if I can cross connect these 
here, then I can provide the customer with the same level of service at 
a better price point and make some money in the process. No customer end 
reconfiguration will be permitted, I can only do this on the provider 
side or not at all.

Mike-