[c-nsp] Hardware Question

[Saku Ytti]

On (2012-07-29 22:15 -0400), Joseph Hardeman wrote:

> any and it is operating in normal PFC3BXL mode.  Which should mean we get
> around, if understand Saku's calculations correctly, then the engine should
> be passing around 32Mpps from this card to the SUP engine.

Around 32Mpps aggregated for all cfc cards in the system.

> Do you know of any specific commands that I should run to help me make sure
> that the hardware is running properly and the Line Card hasn't caused the
> Engine to fall down to a B or A mode?

You already used that specific command.

-- 
  ++ytti