[c-nsp] Multicast through Cisco ME-3600

[Hitesh Vinzoda]

HI Reuben,

This is what i thought that we are on very early release of IOS. Show
commands of OSPF doesn't reveal much, while the OSPF debugs reveals that
they are sending hello's but neighbors hello's are not seen on both devices.

This pretty much suggests that ME3600 is unable to handle Multicast through
EFP.

MTU is fine and i also think that it will come only in picture during DBD
exchage, and they get stuck in exstart state, which is not the case here.

Further i don't see any special configuration exists under EFP where we
have to define supportive config for Multicast.

Thanks for the inputs though.

Best regards,
Hitesh

On Sat, Nov 24, 2012 at 4:12 PM, Reuben Farrelly
<reuben-cisco-nsp at reub.net>wrote:

>
>