[c-nsp] 4500X weird issue...

[Jeff Kell]

Follow-up...  the secondary booted up OK.  We're looking at a possible
RMA on the failing one (TAC case open) rather than cracking the case on
a virgin switch to mess with flash :).

Jeff

On 12/6/2013 11:25 PM, Jeff Kell wrote:
> We received our first pair of 4500X switches, and proceeded to try to
> prepare them for deployment.  They came up OK on console access, we got
> a very basic configuration setup, linked them together, and did an
> initial VSS pairing.
>
> With that successful, we put in a management IP address for the
> management port, saved everything, and proceeded to move them to the
> server room.
>
> Upon power-up at the new location, they won't boot...
>
>>  ****************************************************************
>>  *                                                              *
>>  * Rom Monitor NVRAM configuration is being initialized to      *
>>  * default values. This may be because it was never initialized.*
>>  *                                                              *
>>  ****************************************************************
>> Writing to Primary Region failed
>> Writing to Backup Region failed
>>