[c-nsp] VACL and SPAN load share on destination ports

[Phil Mayers]

On 08/01/13 08:49, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote:
> Dears ,
>
>    Below the configuration for SPAN and VACL :

Don't hijack an existing thread; start a new one.


>      load balancing is needed between Gi9/24 and Gi9/46 by VACL  , and
> needed between Gi1/43 and Gi9/23 by SPAN. I tried to group Gi9/24 and
> Gi9/46 into a port channel but "switchport capture" was not supported
> under a Po, I tried also to load balance manually by  "switchport
> capture allowed vlan ..."  but I start to have one way traffic and lot
> of  missing packet   :

Platform and IOS version?