[c-nsp] VACL and SPAN load share on destination ports

[Ben Hammadi, Kayssar (NSN - TN/Tunis)]

Hi, 

 Sorry , this is my first thread .  Plateform is 6509 , IOS is SXI8 

Br.
Kayssar

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of ext Phil Mayers
Sent: Tuesday, January 08, 2013 12:11 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] VACL and SPAN load share on destination ports

On 08/01/13 08:49, Ben Hammadi, Kayssar (NSN - TN/Tunis) wrote:
> Dears ,
>
>    Below the configuration for SPAN and VACL :

Don't hijack an existing thread; start a new one.


>      load balancing is needed between Gi9/24 and Gi9/46 by VACL  , and
> needed between Gi1/43 and Gi9/23 by SPAN. I tried to group Gi9/24 and
> Gi9/46 into a port channel but "switchport capture" was not supported
> under a Po, I tried also to load balance manually by  "switchport
> capture allowed vlan ..."  but I start to have one way traffic and lot
> of  missing packet   :

Platform and IOS version?
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/