[c-nsp] Auto Negotiate

[Harry Hambi]

Good afternoon all,
Been having some strange issues recently regarding auto negotiate. The switches in questions are 6509 running IOS 12.2<17r>SX3, and 3750 stack IOS 12.2.<53r>SE1. Some pc's connected to ports on these switches will not get an IP address when configured to auto..
changed the Network Adapter Link Speed from Auto Neg to 100 meg Full ...pc aquires IP,
Changed to 100 meg Half, pc works.
Port states show no errors, tried changing ports on switch no change. Any ideas appreciated.
Rgds
Harry


Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb



------------------------------------
http://www.bbc.co.uk
This e-mail (and any attachments) is confidential and
may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in
error, please delete it from your system.
Do not use, copy or disclose the
information in any way nor act in reliance on it and notify the sender
immediately.
Please note that the BBC monitors e-mails
sent or received.
Further communication will signify your consent to
this.
------------------------------------