[c-nsp] ME-3600 Can't see ip pim vrf neighbor

[Claes Jansson]

Also be sure to use

ip pim ssm default

and

sdm prefer applications

By default "MDT mroutes" are 0...

I have tested this on 15.3(2)S.

Claes Jansson
Gästabudstaden AB

On 2013-05-23 08:38, PlaWanSai wrote:
> I try to run Multicast VPN on the ME-3600 back-to-back with the 7609. It
> does not see pim neighbor. I tested on 15.1(2)EY4, 15.3(1)S and 15.3(2)S IOS
> version. I used this configuration between 7609 is work.
>
>   
>
> test-co3600#sho ip pim vrf IPTV-M nei
>
> PIM Neighbor Table
>
> Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,
>
>        P - Proxy Capable, S - State Refresh Capable, G - GenID Capable
>
> Neighbor          Interface                Uptime/Expires    Ver   DR
>
> Address                                                            Prio/Mode
>
> test-co3600#
>
>   
>
> Thank you very much.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>