[c-nsp] ME-3600 Can't see ip pim vrf neighbor

[PlaWanSai]

I enabled on loopback 0. And I see this log on first boot:

000038: *May 22 16:28:50.879 BKK: NQATM: 
000039: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000040: *May 22 16:28:50.879 BKK: NQATM: 
000041: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000042: *May 22 16:28:50.879 BKK: NQATM: 
000043: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000044: *May 22 16:28:50.879 BKK: NQATM: 
000045: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000046: *May 22 16:28:50.879 BKK: NQATM: 
000047: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000048: *May 22 16:28:50.879 BKK: NQATM: 
000049: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000050: *May 22 16:28:50.879 BKK: NQATM: 
000051: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000052: *May 22 16:28:50.879 BKK: NQATM: 
000053: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000054: *May 22 16:28:50.879 BKK: NQATM: 
000055: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle
000056: *May 22 16:28:50.879 BKK: NQATM: 
000057: *May 22 16:28:50.879 BKK: nqatm_add_mdt_tcam_entry:Failed allocate
tcam hw handle

Thank you very much.

-----Original Message-----
From: Claes Jansson [mailto:claes at gastabud.com] 
Sent: Thursday, May 23, 2013 7:34 PM
To: PlaWanSai
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] ME-3600 Can't see ip pim vrf neighbor

Also be sure to use

ip pim ssm default

and

sdm prefer applications

By default "MDT mroutes" are 0...

I have tested this on 15.3(2)S.

Claes Jansson
Gästabudstaden AB

On 2013-05-23 08:38, PlaWanSai wrote:
> I try to run Multicast VPN on the ME-3600 back-to-back with the 7609. 
> It does not see pim neighbor. I tested on 15.1(2)EY4, 15.3(1)S and 
> 15.3(2)S IOS version. I used this configuration between 7609 is work.
>
>   
>
> test-co3600#sho ip pim vrf IPTV-M nei
>
> PIM Neighbor Table
>
> Mode: B - Bidir Capable, DR - Designated Router, N - Default DR 
> Priority,
>
>        P - Proxy Capable, S - State Refresh Capable, G - GenID Capable
>
> Neighbor          Interface                Uptime/Expires    Ver   DR
>
> Address
Prio/Mode
>
> test-co3600#
>
>   
>
> Thank you very much.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>