[c-nsp] EIGRP Variance

[M K]

Hi RandyI know what the variance command does and know how to manipulate I was challenged to do what I asked without using any filtering or touch the variance command configured

> Date: Fri, 29 Nov 2013 14:35:22 -0800
> From: randy_94108 at yahoo.com
> Subject: Re: [c-nsp] EIGRP Variance
> To: gunner_200 at live.com; cisco-nsp at puck.nether.net
> 
> ----- Original Message -----
> 
> > From: M K <gunner_200 at live.com>
> > To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
> > Cc: 
> > Sent: Friday, November 29, 2013 1:55 PM
> > Subject: [c-nsp] EIGRP Variance
> > 
> > Hi I have two unequal cost paths to reach a specific destinationI configured 
> > variance and the two routes are installed in the routing tableHow can I use the 
> > low cost always with keeping the other one installed in the routing table ?
> 
> 
> If I understand you correctly:
> You have enabled unequal-cost load sharing via variance but *don't wish* to load share.
> 
> Does that make any sense to you?
> 
> Disable variance, lowest cost path will be in rib and EIGRP topology db will have both - tweak delay if needed so the *other* exists as a feasibel successor.
> ./Randy
>