[c-nsp] HSRP failover/failback question

Jeyamurali Sivapathasundaram sjeyamurali at gmail.com
Sat Aug 2 06:58:43 EDT 2014


Are you using any ACL filtering on the VLAN if so is udp port 1985 permitted  ?

Jey S.
Network Engineer
CCIE #41608

Sent from my iPhone

> On 2 Aug 2014, at 11:48, Gert Doering <gert at greenie.muc.de> wrote:
>
> Hi,
>
>> On Fri, Aug 01, 2014 at 04:16:04PM -0400, Randy wrote:
>> PRIMARY ROUTER VLAN X:
>> standby version 2
>> standby 0 ip x.x.x.x
>> standby 0 priority 150
>> standby 0 preempt delay minimum 600
>
> This is what we use, and it used to work fine.
>
> Test it... "debug standby terse" and then shu/noshu one of the VLAN
> interfaces...  and if it doesn't work, yell at TAC.
>
> (Insert rant about the general silliness of "standby version 2" here,
> maybe it's just broken in v2...)
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
>                                                           //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list