[c-nsp] Old Cisco VXR

Chris Evans chrisccnpspam2 at gmail.com
Wed Aug 27 12:32:21 EDT 2014


for some reason i seem to remember that if you have the i/o modules with
console in them that it disables the onboard console on the g1/g2 engines..

Been a while since i've touched one of these though.


On Wed, Aug 27, 2014 at 9:12 AM, Scott Granados <scott at granados-llc.net>
wrote:

> If you have the old 25 pin mod tap that comes with the console cables you
> can use that which converts you to RJ45 and then you can use your normal 9
> pin on the other end.  Else you need a regular null modem type cable which
> are readily available.  As someone else mentioned, if you’re using a G1 or
> G2 there should be an RJ45 console port as well.
>
> On Aug 27, 2014, at 6:27 AM, Mohammad Khalil <eng_mssk at hotmail.com> wrote:
>
> > Hi all
> > I have old Cisco VXR I need to access with console , but it's not RJ45
> console , it's like the computer ports
> > is there a specific cable to use?
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list