[c-nsp] ASR1006 Memory issue

Jordi Magrané Roig jordimagrane at hotmail.com
Mon Dec 15 05:15:58 EST 2014


Dear all,

I have an ASR1006 with two RSP2, two ESP20 and two SIP-10. Since last Thursday 11 of december, I see in the logs the following information:

%PLATFORM-4-ELEMENT_WARNING: R0/0: smand:  SIP/0: Committed Memory  value 96% exceeds warning level 95%

I have seen the following bug:

https://tools.cisco.com/quickview/bug/CSCtj47922

the bug says that the log message is totally cosmetic and it is fixed in the release 15.1(1)S. But I have this release and the output of the command "show plat software stat control-proc brief" is :

ASR1006-LIS01-02#show plat software stat control-proc brief  
Load Average
 Slot  Status  1-Min  5-Min 15-Min
  RP0 Healthy   0.12   0.03   0.01
  RP1 Healthy   0.00   0.00   0.00
 ESP0 Healthy   0.02   0.05   0.02
 ESP1 Healthy   0.00   0.00   0.00
 SIP0 Healthy   0.00   0.00   0.00
 SIP1 Healthy   0.01   0.04   0.11

Memory (kB)
 Slot  Status    Total     Used (Pct)     Free (Pct) Committed (Pct)
  RP0 Healthy  8067388  3762952 (47%)  4304436 (53%)   5961376 (74%)
  RP1 Healthy  8067388  2942444 (36%)  5124944 (64%)   5957644 (74%)
 ESP0 Healthy  3877056   928100 (24%)  2948956 (76%)   3244284 (84%)
 ESP1 Healthy  3877056   920520 (24%)  2956536 (76%)   3240220 (84%)
 SIP0 Healthy   449776   435792 (97%)    13984 ( 3%)    428504 (95%)
 SIP1 Healthy   449776   412116 (92%)    37660 ( 8%)    372824 (83%)

CPU Utilization
 Slot  CPU   User System   Nice   Idle    IRQ   SIRQ IOwait
  RP0    0   0.20   0.10   0.00  99.50   0.10   0.10   0.00
         1   0.19   0.19   0.00  99.50   0.00   0.09   0.00
  RP1    0   0.00   0.00   0.00 100.00   0.00   0.00   0.00
         1   0.20   0.00   0.00  99.80   0.00   0.00   0.00
 ESP0    0   0.39   0.69   0.00  98.90   0.00   0.00   0.00
 ESP1    0   1.40   2.80   0.00  95.80   0.00   0.00   0.00
 SIP0    0   1.10   0.70   0.00  98.19   0.00   0.00   0.00
 SIP1    0   1.10   0.70   0.00  98.10   0.10   0.00   0.00


I don't know exactly if this issue is cosmetic or not. Could somebody help me?

Thank you very much.

Best regards,
Jordi.

 		 	   		  


More information about the cisco-nsp mailing list