[c-nsp] I need to limit BW ASR9K

[Elizabeth Millan Castaño]

El 02/07/14 08:59, Elizabeth Millan Castaño escribió:
>
>
> Cordial Saludo,
>
> I have the following problem in a Cisco ASR9K. I need to limit BW of 
> an interface Bundle-Ethernet to 1075Mbps. This Bundle is a LACP made 
> with two giga-ethernet interfaces. I've applied a policy-map with rate 
> 1075Mbps. (See Configuration).
>
>
> policy-map BW_Internet_IXA
> class class-default
> police rate 1075 mbps
> conform-action transmit
> exceed-action drop
> end-policy-map
>
>
> The Cisco ASR9K, show the following Errors.
>
> !! SEMANTIC ERRORS: This configuration was rejected by
> !! the system due to semantic errors. The individual
> !! errors with each failed configuration command can be
> !! found below.
>
>
> interface Bundle-Ether2
>  service-policy input BW_Internet_IXA
> !!% 'qos-lib' detected the 'warning' condition 'MQC: Policer conform 
> rate is greater than the reference parent bandwidth'
>  service-policy output BW_Internet_IXA
> !!% 'qos-lib' detected the 'warning' condition 'MQC: Policer conform 
> rate is greater than the reference parent bandwidth'
> !
> end
>
> What's missing inthe configuration?. Do I have to change my interfaces 
> to one Tengiga?
>
>
> Atentamente,
> *
> Elizabeth Millán Castaño*
>