[c-nsp] Cisco ME3800X with EIGRP

[Pete Lumbis]

What version of code are you running?


On Sun, Mar 9, 2014 at 6:00 PM, <steve at itps.uk.net> wrote:

> Hi NSP,
>
> Is anyone familiar with the 3800X and why we are unable to configure EIGRP
> for IPv6 even though its clearly stated in the configuration guide as
> available?
>
>
> http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/r
> elease/15-3_1_S/configuration/guide/3800x3600xscg/swipv6.html#wp1117377
>
> We are a cisco only shop and prefer to use EIGRP to distribute our
> loopbacks
> and backbone links and we've came across this issue while trying to dual
> stack.
>
> I suspect this is an error in the document as the commands simply aren't
> there, if so - anyone got any inside info on if cisco plan to support eigrp
> for IPv6 on their own switch anytime soon!?
>
> Just found a section that states there's plenty missing for IPv6 with these
> switches - can anyone elaborate why cisco isn't putting the features into
> this switch, this has been excellent for us as ipv4 mini-pe.
>
> Unsupported IPv6 Unicast Routing Features
> .IPv6 policy-based routing
> .IPv6 virtual private network (VPN) routing and forwarding (VRF) table
> support
> .IPv6 packets destined to site-local addresses
> .Tunneling protocols, such as IPv4-to-IPv6 or IPv6-to-IPv4
> .The switch as a tunnel endpoint supporting IPv4-to-IPv6 or IPv6-to-IPv4
> tunneling protocols
> .IPv6 unicast reverse-path forwarding
> .IPv6 general prefixes
> .HSRP for IPv6
> .SNMP and Syslog over IPv6
> .MPLS for IPv6
> .ACL for IPv6
> .BFD for IPv6
> .IPv6 Multicast
> .RIP for IPv6
> .EIGRP IPv6
>
> Many thanks
>
> SteveH
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>