[c-nsp] "ipv6 router ospf" vs "router ospfv3"

[Tim Durack]

RTR-3#sh run | sec router ospf
router ospf 10
 router-id 10.116.0.3
 max-metric router-lsa on-startup 300
 ispf
 auto-cost reference-bandwidth 100000
ipv6 router ospf 10
 router-id 10.116.0.3
 auto-cost reference-bandwidth 100000
 max-metric router-lsa on-startup 300
end

vs.

RTR-1#sh run | sec router ospf
router ospfv3 10
 router-id 10.116.0.221
 max-metric router-lsa on-startup 300
 auto-cost reference-bandwidth 100000
 !
 address-family ipv6 unicast
 exit-address-family
router ospf 10
 router-id 10.116.0.221
 max-metric router-lsa on-startup 300
 ispf
 auto-cost reference-bandwidth 100000
end

At this point we prefer to run OSPFv2 for IPv4 and OSPFv3 for IPv6, so
multi-af support is not critical.

I'm thinking "router ospf" and "router ospv3" might be the preferred cli.

-- 
Tim:>