[c-nsp] first post: SA-VAM2 question

[Rob Seastrom]

Dave McGuire <mcguire at neurotica.com> writes:

>   Hey folks, new listmember here.  Greetings to everyone; I'm sure I'll
> see some familiar names here.
>
>   I'm wondering if someone can clear something up for me.  I have a
> 7206VXR with an NPE-G1 with 1GB of RAM, running
> "c7200-adventerprisek9-mz.151-4.M2.bin".  I am doing some IPsec tunnels
> and everything works great.
>
>   I picked up an SA-VAM2 module recently, which from everything I can
> find should function in this configuration.  However, "sh diag" reports
> this module as "disabled unsuitable deactivated powered off".  As
> evidenced by the module's LEDs at boot time, it powers up momentarily
> and then powers down.
>
>   I think it ought to be working; I'm guessing I've missed something.
> Possibly something rather stupid. ;)  Can anyone point me in the right
> direction?  I appreciate any advice from the collective sage wisdom of
> cisco-nsp.

Have you tried feature navigator?  I see documentation that an SA-VAM2
should work with an NPE-G1, but the "Last Date of Support" for that
board was April 29, 2011...  I would not be too sanguine about support
for it at all in 15.1.

-r