[c-nsp] Cisco ASR1002x + SPA Adapter (SPA-1X10GE-L-V2) Issues

[Antoine Monnier]

there is a bug in IOS-XE 3.13 that means inserted SPA may not be properly
detected and you may need a reload CSCut03205

On Tue, Jul 28, 2015 at 2:09 PM, Mark Tinka <mark.tinka at seacom.mu> wrote:

>
>
> On 28/Jul/15 13:31, Troy Boutso wrote:
> > Alexandr
> >
> > I reinserted the damn thing like 10 + times and into multiple slots. :)
> >
> > I really want to avoid reloading, especially if I'm not supposed to.
> Which
> > shouldn't be required for this task.
> >
> > Has anyone else actually had to reload their appliance to get a SPA card
> to
> > work?
>
> Never had to.
>
> The only reason you'd need to is if you need a firmware update in order
> for a SPA to be recognized. But given how new the ASR1002-X is and how
> old the 10Gbps SPA is, I doubt you'd need that.
>
> You'd probably need to reload a SPA-supporting PLIM on a CRS or ASR9000
> chassis in case it has just been newly released and is still working its
> way up the SPA chain, on the back of an FPD update.
>
> But other than that, no, you shouldn't need to reload the router to get
> this card recognized.
>
> Mark.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>