[c-nsp] L2VPN Ingress Policing on ME3600

[Waris Sagheer (waris)]

Amos,
I have covered this in my ME3600X Cisco Live San Francisco session. The session deck is available at the following location.
http://www.warisinfo.com/my-presentations


Best Regards,

[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg]

Waris Sagheer
Technical Marketing Manager
Service Provider Routing Segment
waris at cisco.com<mailto:waris at cisco.com>
Phone: +1 408 853 6682
Mobile: +1 408 835 1389

CCIE - 19901


<http://www.cisco.com/>



This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html



From: "cisco-nsp-bounces at puck.nether.net<mailto:cisco-nsp-bounces at puck.nether.net>" <cisco-nsp-bounces at puck.nether.net<mailto:cisco-nsp-bounces at puck.nether.net>> on behalf of Amos Thong <amosthy at hotmail.com<mailto:amosthy at hotmail.com>>
Date: Thursday, October 29, 2015 at 11:08 AM
To: "cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>" <cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>>
Subject: [c-nsp] L2VPN Ingress Policing on ME3600

Hi All,



Can any share if a L2VPN ingress policing on a ME3600, is doing accounting at L1 or L2 frame ?


(a) L2 Frame ( aka MEF service frame ) without the
"Inter-Frame Gap" and "Preamble & Start of Frame"


(b) L1 Frame ( aka 802.3 frame ) that is inclusive of
"Inter-Frame Gap" and "Preamble & Start of Frame"



Input is appreciated. Typical config is as follow.
Regards
Amos
interface GigabitEthernet0/1
description l2vpn:customer
switchport trunk allowed vlan none
switchport mode trunk
mtu 9178
no cdp enable
hold-queue 2000 in
service instance 1 ethernet
description l2vpn:customer
  encapsulation dot1q 1000
  rewrite ingress tag pop 1 symmetric
  service-policy input CUSTOMER-QOS-IN-L2VPN-6M
  service-policy output CUSTOMER-QOS-OUT-L2VPN-6M
  bridge-domain 1000
interface Vlan1000
description  l2vpn:customer
mtu 9178
bandwidth 6000
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
xconnect 223.28.0.41 5053 encapsulation mpls pw-class eompls-interworking-ethernet
hold-queue 2000 in
end


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/