[c-nsp] L2VPN Ingress Policing on ME3600

[Amos Thong]

Thank you very much Waris. 
 
Regards
Amos
 
From: waris at cisco.com
To: amosthy at hotmail.com; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] L2VPN Ingress Policing on ME3600
Date: Sun, 1 Nov 2015 17:43:52 +0000








Amos,
I have covered this in my ME3600X Cisco Live San Francisco session. The session deck is available at the following location.
http://www.warisinfo.com/my-presentations







Best Regards,











Waris Sagheer

Technical Marketing Manager

Service Provider Routing Segment

waris at cisco.com

Phone: +1 408 853 6682

Mobile: +1 408 835 1389



CCIE - 19901
















This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient
 (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message.

For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html


















From: "cisco-nsp-bounces at puck.nether.net" <cisco-nsp-bounces at puck.nether.net> on behalf of Amos Thong <amosthy at hotmail.com>

Date: Thursday, October 29, 2015 at 11:08 AM

To: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>

Subject: [c-nsp] L2VPN Ingress Policing on ME3600







Hi All, 










Can any share if a L2VPN ingress policing on a ME3600, is doing accounting at L1 or L2 frame ?







(a) L2 Frame ( aka MEF service frame ) without the
"Inter-Frame Gap" and "Preamble & Start of Frame"






(b) L1 Frame ( aka 802.3 frame ) that is inclusive of
"Inter-Frame Gap" and "Preamble & Start of Frame"









Input is appreciated. Typical config is as follow. 

Regards
Amos

interface GigabitEthernet0/1
description l2vpn:customer
switchport trunk allowed vlan none
switchport mode trunk
mtu 9178
no cdp enable
hold-queue 2000 in
service instance 1 ethernet                        
description l2vpn:customer
  encapsulation dot1q 1000                        
  rewrite ingress tag pop 1 symmetric                       
  service-policy input CUSTOMER-QOS-IN-L2VPN-6M
  service-policy output CUSTOMER-QOS-OUT-L2VPN-6M
  bridge-domain 1000            


interface Vlan1000
description  l2vpn:customer
mtu 9178
bandwidth 6000
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
xconnect 223.28.0.41 5053 encapsulation mpls pw-class eompls-interworking-ethernet    

hold-queue 2000 in                                                                          

end
               
  
  
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/