[c-nsp] ACE30 Config

[harbor235]

Config looks good for the 6500 portion of the config as long as the vlans
you have specified for vlan-group 10 are unused?
I also assume you have created the vlans as well?

Mike

On Tue, Aug 16, 2016 at 8:07 AM, Chris Knipe <savage at savage.za.org> wrote:

> Hi Guys,
>
> Quick question... I'm about to install my first ACE30 into a 6500
> (SUP720)... Just a quick question about the svclc if I may...
>
> I already have VLAN101 with all my rservers (currently in production, being
> fed from a old LB we'll be replacing with the ACE30).
>
> I created  a new VLAN102 which will be used for the customer facing leg of
> the ACE...
>
> Config:
> svclc vlan-group 10 101,102
> svclc module 1 vlan-group 10
> svclc multiple-vlan-interfaces
>
> Are those commands safe?  I'm not sure whether or not the switch will drop
> traffic to VLAN101 which is currently doing some 2Gbps in traffic.
>
> --
>
> Regards,
> Chris
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>