[c-nsp] Configure port to supply PoE only

Chuck Church chuckchurch at gmail.com
Thu Jan 14 21:56:15 EST 2016

You could simply create a bogus VLAN for each AP, and put each port in a separate VLAN in access mode.  Pretty simple config.  Or a private isolated VLAN, but that is a little more config work.


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ricardo Stella
Sent: Thursday, January 14, 2016 5:57 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Configure port to supply PoE only

Hi folks,

Sorry if this might be a 'stupid' question.  I need to test a wireless mesh configuration and the only thing I have available to supply power to the access points (PoE+) is a 2960S switch.

The switch is isolated to the network, but when it seems that when I add more than one access point to it, they are 'talking' to each other.  So is there a way to configure the ports so that the ports only supply power?
The moment the second access point is connected and goes up, I start getting flapping errors.

Thanks in advance for your help and apologies if it is indeed a dumb question. All I ask is that you minimize your laughs.  :)


cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list