[c-nsp] ISR4431 integrated "POE" ports

[Octavio Alvarez]

On 05/10/2016 05:24 PM, CiscoNSP List wrote:
> 
> Thanks Nathan - The device has 8 ports as per the doc here:
> 
> http://www.cisco.com/c/en/us/td/docs/routers/access/4400/hardware/installation/guide4400-4300/C4400_isr/Overview.html#32890

It's 4 dual-port interfaces, not 8 interfaces. You can use the SFP *or*
RJ-45 port for that interface (you choose using "media-type" in
interface config mode) but it's only one interface.

Ports 0 and 1 (only on RJ-45) can additionally be set as PoE if certain
conditions are met.

So you can not use the two ports of the same interface simultaneously.

Best regards.