[c-nsp] Cisco ME1200 iCLI

[Holger L]

On Mon, November 28, 2016 20:54, Gregor Jeker wrote:
> Hi Guys
> We have also been working with a demo pair of those, intended as CPE for
> some E-Line like services. From my side, I have never seen that weird CLI
> everyone is talking about, I just started with the console and had a very
> IOS-like CLI. I got the devices from the demo pool, so maybe someone
> before hit some magic command, or maybe it depends on the set of
> credentials or the firmware? I used admin/sandino, the software in use is:
>
> ME1200-1# sh ver
> [...]
> Active Image
> ------------
> Image            : me1200-universal-mz.156-2.SN.dat (primary)
> Version          : ME1200 OS Software Build 15.4-3.SN
>
> ME1200-1# show inventory
> NAME: "ME1200", DESCR: "Network Interface Device"
> PID: ME1200-4S-A , VID: V01 , SN: RTC1XXXXXXXX
>
> Just to give you some examples of what I am seeing with this device:
>
> ME1200-1# sh run int gig 1/1
> Building configuration...
> interface GigabitEthernet 1/1
>  switchport hybrid native vlan 100

Wow that's weird. Why do you get the iCLI and I get this crapy shell? Our
Image is me1200-universal-mz.156-2.SN which is the same as yours. But our
OS Version is different, we have "OS Software Build 15.6-2.SN" (same as
the Image). And I also use the admin/sandino default priv 15 user..

>  Some commands and especially the show outputs are a little different than
> traditional IOS. However, no problems getting things up&running.

It would be very happy with a shell like yours :) But how to get it?

>  Cheers,
>  Gregor

Cheers,
Holger