[c-nsp] Resilient Ethernet Protocol (REP)

[Steve Dodd]

REP frames are sent untagged to 0100.0ccc.ccce. Try adding encapsulation
untagged to your service instances.

On Thu, Jan 11, 2018 at 2:40 AM, Fernando Cardoso <fcardoso at eem.pt> wrote:

> Hi,
>
> i'm trying to pass REP through a MPLS network. the two PE are me3600.
> The configuration:
>
> Me 3600 PE1:
> interface GigabitEthernet0/xx
> switchport trunk allowed vlan none
> switchport mode trunk
> mtu 9216
> service instance 100 ethernet
>   encapsulation dot1q 1-4094
>   rewrite ingress tag push dot1q 100 symmetric
>   l2protocol forward
>   service-policy input ratelimit_200Mb
>   xconnect xxx.xxx.xxx.xxx 100 encapsulation mpls
>
> Me 3600 PE2:
>  interface GigabitEthernet0/yy
> switchport trunk allowed vlan none
> switchport mode trunk
> mtu 9216
> service instance 100 ethernet
>   encapsulation dot1q 1-4094
>   rewrite ingress tag push dot1q 100 symmetric
>   l2protocol forward
>   service-policy input ratelimit_200Mb
>   xconnect yyy.yyy.yyy.yyy 100 encapsulation mpls
>
>
>
> I have no success the REP between CE´s  not working, I  tried with
> "l2protocol tunnel" but the problem persists...
>
>
>
> The ios image used is "me360x-universal-mz.154-3.S2.bin"
>
>
>
> Can see anything about this online, does anyone have this issue?
>
>
> Best Regards
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>