[c-nsp] IOS XR and MPLSoMGRE

[Arie Vayner]

Mihai,

Try checking this document:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r6-1/lxvpn/configuration/guide/b-l3vpn-cg-asr9k-61x/b-l3vpn-cg60xasr9k_chapter_0100.pdf

I have a feeling this will require a bit trial and error, but this seems to
be the right direction.

On Wed, May 16, 2018 at 2:57 PM <mihai at duras.ro> wrote:

> Hi guys,
>
> I'm trying something strange and funky in a lab and of course ending up
> at a dead-end :)
>
> I'm trying to configure OpenContrail to peer with ASR9K.
> I've already found a sample configuration for ASR903 but that one has
> IOS XE.
>
> Does anyone know if there is an equivalent for the following commands on
> IOS XR?
> So far I can't find anything and am knocking my head against the wall a
> bit (I did find that MGRE should be supported though and MPLS over it).
>
> l3vpn encapsulation ip MGRE
>   transport ipv4 source GigabitEthernet0/4/7
>
> route-map SELECT_UPDATE_FOR_L3VPN permit 10
>    set ip next-hop encapsulate l3vpn MGRE
>
> Thanks in advance,
> Mihai
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>