[cisco-voip] CCM 3.3(4) Cluster config

[Ahmad Cheikh Moussa]

Hi!

I have a Cisco callmanager Cluster 3.3(4) and a H.323 Voice gateway.
In the cluster are a publisher and one subscriber.
The cluster is configured and the IP Phones can register to the
publisher and to the subscriber. Actually config is that the IP Phones
register to the publisher and when the publisher fails then they 
register to the subscriber.

As far as good. Now here my problem.
I have several questions.

On the Publisher I have some CTI-Route Points and some
CTI-Route Ports.
How can I made them available on both callmanagers ?
At this time, if the publisher fails, my CTI-Route
configuration fails too.

On the voice gateway I have a dial-peer which directs to
the publisher. How can I configure the router to use
the subscriber, if the publisher fails ?
Here my actually config of the dial-peer :
  dial-peer voice 101 voip
  description Dial-Peer fuer Gespraeche zum CCM1 in Kiel
  destination-pattern [1-5]..
  session target ipv4:1.1.1.1
  dtmf-relay h245-alphanumeric
  codec g711ulaw
  no vad


Now my last question.
I've configured both callmanager to collect cdr records.
On the publisher, I've installed the CDR Analysis tool (CAR).
Are the cdr record automatically recorded to one database ?
If not, what should I do in order to collect the cdr records
in one database?

Thanks in advance
  Ahmad

-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/