[cisco-voip] cant dial out from ip phone

[Chad Whitten]

apparently this is worse than i had feared, turns out, once a phone reboots, 
it cant dial out, no matter what partition its in.

On Wednesday 20 October 2004 08:45, Chad Whitten wrote:
> i came in this morning and found that all phones in one partition could not
> place outbound calls (to the pstn and to other ip phones within the same
> partition or other partitions).  I get a fast busy as soon as I hit any
> key.
>
> I moved my phone to this partition in question and observed the same
> behavior. then, I tried moving my phone back to its normal partition and I
> still could not place outbound calls, but other phones in that partition
> could.  I then just replaced the phone with another (7940) and still had
> the same problem.
>
> Inbound calls work fine (both from the pstn and from an ip phone), the
> phone is registered with the callmanager.
>
> I tried just deleting the phone and readding it.  changing the line number,
> etc.  nothing works.

-- 
Chad Whitten
Network Administrator
neXband Communications
cwhitten at nexband.com
601-944-4801 Phone
601-944-4803 Fax