[cisco-voip] Recover old settings of CRA engine from the Regedittool

[Anthony Kouloglou]

George,
when i look in the services, the CRA engine has not started because it has wrong settings. Since, it has not started, i dont't know how i can access the web interface.
  ----- Original Message ----- 
  From: George Dormishev 
  To: 'Anthony Kouloglou' 
  Cc: cisco-voip at puck.nether.net 
  Sent: ?????????, 22 ????????? 2004 12:44
  Subject: RE: [cisco-voip] Recover old settings of CRA engine from the Regedittool


   

  You should be able to run the CRA from the Admin page with the default pass and user Administrator and ciscocisco they are case sensitive !  If you can do that then the job is half-past done go to Configuration and Repository and change the ccm ip address!!! Restart the Engine and all should work fine.Mine one did!!! 


------------------------------------------------------------------------------

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
  Sent: 22 Октомври 2004 г. 10:36
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Recover old settings of CRA engine from the Regedittool

   

  Hi all,

  could someone please help me with this one.

   I have a ccm 3.3(3) sr3 with a  CRA engine running on it (with no problems at the first time).

  I changed the ip of the CCM and after several months i needed to run the CRA again. But it didnot run since it had the old settings!

  How can i retrieve the old IP address that was configured on the CRA?

  Via the regedit tool? And where is it located?

  Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20041022/0914b4e4/attachment.html