[cisco-voip] BAT - Owner ID

[King, Jesse]

Interesting..

You are correct. I thought that Owner ID and User ID were one in the same. I was looking for device association for the use of the web dialer... It did associate the user id with device correctly...

So Owner ID is used for what then? And can't be used with EM - which we will start using in the future...

Tks..

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Friday, April 08, 2005 10:29 AM
To: King, Jesse
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] BAT - Owner ID

You don't have to configure owner-id (this is the field in the phone page correct?) and if you are planning to use Extension Mobility then you cannot configure this because EM doesn't support this field.

The User ID field in the CSV file I thought was for device association. 
  Is that getting set correctly when you import the phone?

-Ryan
On Apr 8, 2005, at 10:20 AM, King, Jesse wrote:

CM 4.1.2
 
BAT 5.1.3
 
 
When inserting phones, I specify the User ID in the CSV file format section... I assume (bad assumption?) that this is the same as the Owner ID. However, after inserting, I don't get any errors, but the phone's owner ID is blank, and I have to manually add it in. Which works, just time consuming.
 
We are integrated with AD.
 
Any thoughts?
 
Thanks.
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip