[cisco-voip] CCME

[Wes Sisk]

Freddi,

If you are mapping 100 DID numbers to 4 lines, then there is no graceful way
to treat an incoming call waiting tone.  Would have the call extended to the
same person currently using that CO line or instantly cut them off?

Last I checked IOS still did not support use of call waiting on incoming CO
lines.

/Wes

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Freddi Hamdani
Sent: Tuesday, April 12, 2005 12:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCME


Hi All,

I have some question about CCME implementation.

1. I has 2811 with VIC2-4FXO and connect to local PSTN, and my line
come with call waiting support. What will happen if all lines (4
lines) is busy, is the next call will getting busy tone or CCME can
pass the call waiting feature so I will see some indicator in my phone
or hear some beep?

2. I'm base in Singapore and Singtel (as a local telco) over the
virtual DID which is analog line (min 4 lines) with 100 DID number.
I'm thinking to buy this services for my CCME but not sure can work or
not, did someone try it before?

Regards,
Freddi
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip