[cisco-voip] Dialogic to a 6608/T1

[Lelio Fulgenzi]

First thing I would do is check the pinouts. We had a heck of a time getting a T1 extender to work and only got it to work after we created our own cables. :(

Not sure if that helps, but an idea.
  ----- Original Message ----- 
  From: VoIP Forum 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, April 29, 2005 3:14 PM
  Subject: [cisco-voip] Dialogic to a 6608/T1


  Has anyone ever configured a Dialogic D/240JCT-T1 to use a Cat 6608 blade?

   

  The D/240JCT-T1 card comes up and shows a red alarm in the OS, and the same goes for the interface on the 6608 side. If I change the isdn frame type on the card it does not start up, and errors out with error code 16383. That seems to mean I need to change the jumpers, but I am having little to no luck. Any help would be greatly appreciated.

   

  The CCM version is 3.3(4)SR2 and OS on voice server is Server 2000 Advanced Server with SP4.

   

  Thanks



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050429/1cf9f83c/attachment.html