[cisco-voip] Inline-Power / PoE: HWIC-D-9ESW-POE and NM-16ESW-PWR

[Hans-Peter Walter]

just played around with the "dynamic configuration tool" 
(http://www.cisco.com/appcontent/apollo/configureHomeGuest.html)
I configured an 2811 with some inline power stuff.
When it checks the config, it reports some warnings (see below). Why? I 
think everything needed is there?!?
Anybody experience with the HWIC-D-9ESW-POE or  NM-16ESW-PWR? 
Recommendations? Differences?
And maybe somebody can explain the difference between PoE and Inline-Power 
in this case?
I think its the same, just want to be sure...

Thanks,
HP

Product             Description      Quantity 
CISCO2811-AC-IP     2811 w/ AC+POE,2FE,4HWICs,2PVDMs,1NME,2AIMS,IP 
BASE,64F/256D1 
S28NAESK9-12401     Cisco 2800 IOS ADVANCED ENTERPRISE SERVICES      1  
NM-16ESW-PWR        1 16 port 10/100  EtherSwitch NM with In-Line Power 
support 1 
PVDM2-16            16-Channel Packet Voice/Fax DSP Module      1 
HWIC-4ESW-POE       4-Port Ethernet Switch HWIC with Power Over Ethernet   
  1 
HWIC-D-9ESW-POE     9-Port Ethernet Switch HWIC with Power Over Ethernet   
  1 
VIC2-2BRI-NT/TE     Two-port Voice Interface Card - BRI (NT and TE)      1 
 

FL-SRST-SMALL       Feat Lic Survivable Remote Site Telephony up to 24 
phones   1 
PPWR-DCARD-16ESW    1 Power daughtercard for 16 port Etherswitch NM      1 
 
CAB-AC              Power Cord,110V      1 
PWR-2811-AC-IP      Cisco 2811 AC/IP power supply      1 
ROUTER-SDM          Device manager for routers      1 
MEM2800-256D-INC    256MB DDR DRAM Memory factory default for the Cisco 
2800    1 
MEM2800-64CF-INC    64MB CF default for Cisco 2800 Series      1 
CON-OSP-2811ACIP    ONSITE 24X7X4 2811 w/ AC+POE,2FE,4HWICs,2PVDMs,1NME,2  
    1 

==================================================================================================================
Cisco Configuration Tool Configuration Warnings 
1.  Integrated internal inline power supply (such as PWR-28XX-AC-IP) or an 
external power supply (such as PWR-CHASSIS-360W) is recommended for the 
NM-XXESW-PWR selection made. 
2.  Power Over Ethernet (POE) requires an AC plus IP system power supply 
(such as PWR-28XX-AC-IP). 
3.  Do you realize you can enable security services like Firewall/IPS, VPN 
and Network Admission Control(NAC) on this router for an incremental cost? 
Please order appropriate security bundle or image 
==================================================================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051206/f97b7255/attachment.html