[cisco-voip] Inline-Power / PoE: HWIC-D-9ESW-POE and NM-16ESW-PWR

[Lelio Fulgenzi]

According to the following documents, inline power is the Cisco pre-standard for power over ethernet and PoE is the new standard.

Inline Power:
http://www.cisco.com/en/US/netsol/ns340/ns394/ns165/networking_solutions_audience_business_benefit09186a0080154647.html

PoE
http://www.cisco.com/en/US/netsol/ns340/ns394/ns147/ns412/netbr09186a00801f4329.html

The best would be to read the specifications of each product to see exactly what you are getting and whether the product is 802.3af compatible or not. 

Then again, you may not need 802.3af. ;)

  ----- Original Message ----- 
  From: Hans-Peter Walter 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, December 06, 2005 6:10 PM
  Subject: [cisco-voip] Inline-Power / PoE: HWIC-D-9ESW-POE and NM-16ESW-PWR



  just played around with the "dynamic configuration tool" (http://www.cisco.com/appcontent/apollo/configureHomeGuest.html) 
  I configured an 2811 with some inline power stuff. 
  When it checks the config, it reports some warnings (see below). Why? I think everything needed is there?!? 
  Anybody experience with the HWIC-D-9ESW-POE or  NM-16ESW-PWR? Recommendations? Differences? 
  And maybe somebody can explain the difference between PoE and Inline-Power in this case? 
  I think its the same, just want to be sure... 

  Thanks, 
  HP 

  Product             Description                                                 Quantity  
  CISCO2811-AC-IP     2811 w/ AC+POE,2FE,4HWICs,2PVDMs,1NME,2AIMS,IP BASE,64F/256D1         
  S28NAESK9-12401     Cisco 2800 IOS ADVANCED ENTERPRISE SERVICES                 1         
  NM-16ESW-PWR        1 16 port 10/100  EtherSwitch NM with In-Line Power support 1         
  PVDM2-16            16-Channel Packet Voice/Fax DSP Module                      1         
  HWIC-4ESW-POE       4-Port Ethernet Switch HWIC with Power Over Ethernet        1         
  HWIC-D-9ESW-POE     9-Port Ethernet Switch HWIC with Power Over Ethernet        1         
  VIC2-2BRI-NT/TE     Two-port Voice Interface Card - BRI (NT and TE)             1         

  FL-SRST-SMALL       Feat Lic Survivable Remote Site Telephony up to 24 phones   1         
  PPWR-DCARD-16ESW    1 Power daughtercard for 16 port Etherswitch NM             1         
  CAB-AC              Power Cord,110V                                             1         
  PWR-2811-AC-IP      Cisco 2811 AC/IP power supply                               1         
  ROUTER-SDM          Device manager for routers                                  1         
  MEM2800-256D-INC    256MB DDR DRAM Memory factory default for the Cisco 2800    1         
  MEM2800-64CF-INC    64MB CF default for Cisco 2800 Series                       1         
  CON-OSP-2811ACIP    ONSITE 24X7X4 2811 w/ AC+POE,2FE,4HWICs,2PVDMs,1NME,2       1         

  ================================================================================================================== 
  Cisco Configuration Tool Configuration Warnings 
  1.  Integrated internal inline power supply (such as PWR-28XX-AC-IP) or an external power supply (such as PWR-CHASSIS-360W) is recommended for the NM-XXESW-PWR selection made. 
  2.  Power Over Ethernet (POE) requires an AC plus IP system power supply (such as PWR-28XX-AC-IP). 
  3.  Do you realize you can enable security services like Firewall/IPS, VPN and Network Admission Control(NAC) on this router for an incremental cost? Please order appropriate security bundle or image   
  ==================================================================================================================


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051206/6cccecd1/attachment-0001.html