[cisco-voip] Re: PBX functionality with Call manager 4.0

[Mike L. Prince]

Dummy line with CFA to pilot point makes call show up wierd and confuses use as it says call forwarded from xxxx and caller-id info shows up 
differently on the screen.

Mike

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Wes Sisk
Sent: Friday, February 11, 2005 2:28 PM
To: Sean Eckton
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Re: PBX functionality with Call manager 4.0


to get it to go to a specifig voicemail box, first bounce the call 
through a dummy line configured to CFA to your hunt pilot.  Then add 
your voicemail hunt list as the last member of the hunt list.

/Wes

Sean Eckton wrote:

> On Feb 10, Mike Prince asked:
>  
> We would like inbound calls to ring a primary group of extensions (line 
> group ?) and if no one picks up continue ringing the primary group and 
> start ringing a secondary group (backup personell). If the secondary 
> group fails to answer, I then want to send the call to a specific 
> voicemail box. I know we can do this with line groups and huntlists but 
> no one seems to know an easy way to send it to voicemail plus an 
> extension can only be in one line group.
>  
> I don't know anything about the first part, but sending the call to 
> voicemail is an interesting one.  I opened a case with TAC and they 
> said it couldn't be done.  I asked on here and was told to put the 
> last DN in the group to go to a number that is CFA to voicemail.  We 
> know that doesn't work with line groups because they ignore 
> forwarding.  It was also suggested by someone to put the Unity 
> voicemail line group as the last line group in the hunt list.  Well, 
> that goes to voicemail all right, but you get the default unity 
> greeting:  "Welcome to Cisco Unity Messaging.  From a touch-tone 
> phone..."  That's not what you want either.  The company that helped 
> us do our install came up with a solution.  Setup the hunt list and 
> put all of the line groups in it the way you want including the 
> voicemail line group as the last one.  Then, instead of publishing the 
> pilot point for the hunt list, publish a CTI Route Point number 
> instead that is CFA to the pilot point.  That way when it gets to 
> Unity, it believes it is getting there for the CTI Route Point's 
> voicemail box and that's the one it goes to.  Works great!
>  
> Sean Eckton
> Network Administrator
> Information Systems Department
> Horizon Bank Cornwall Office
>  
> Office:  (360) 756-2534
> Cisco IP Phone:  (360) 722-7570 (7570 for internal Cisco phone users)
>  
> sean.eckton at horizonbank.com <mailto:sean.eckton at horizonbank.com>
>  
> ________________________________
>  
> Notice:  The information contained in this e-mail is legally 
> privileged and confidential information for the sole use of the 
> recipient.  Any use, distribution, transmittal or re-transmittal of 
> information contained in this e-mail by persons who are not intended 
> recipients may be a violation of law and is strictly prohibited.  If 
> you are not the intended recipient, please contact the sender and 
> delete all copies.
>  
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip