[cisco-voip] Unity + Call Forwarding

[Seth Call]

I realize your solution probably still relates to my scenario:

The H.323 trunk is between two CallManagers

Call Forward All is set on a phone to forward across an H.323 trunk; 
this forwarded-to phone is a Cisco IP Phone associated with  the
forwarded-to CCM.

In your original replay, you state that it is up to the 'H.323
destination' to receive and act on the RDNIS IE;  I assume then that the
forwarded-to CCM, if integrated with Unity cross-cluster, will 'play
nice' with that RDNIS information and direct the call to the original
called voicemail box.  

I hope that's correct. Feel free to post if so, or not! I'm in a
situation that makes testing this difficult at the moment;  am just
hunting the net for this information, and having a hard time cornering
this info.  

Thanks all,
Seth Call

-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, February 15, 2005 7:48 PM
To: Seth Call
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity + Call Forwarding

When CCM extends the call setup of the h323 trunk the rdnis IE should be
populated with the original called party number.  It is up to the h323
destination to receive and act on the RDNIS IE.  In the latest versions
of CCM  on h323 gw config page you have options to enable inbound and
oubound RDNIS individually.

/Wes

Seth Call wrote:

> Scenario:  Call Forward All is set on a phone to forward across an
> H.323 trunk.
> Question:  Can Unity be configured to use the voicemail associated 
> with the phone that was first called; not the forwarded-to phone?
>  
> Thank you,
> Seth Call
>
>-----------------------------------------------------------------------
>-
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>