[cisco-voip] Re: dtmf on h.323 truck to avaya Definity s8700

Walenta, Phil philip.walenta at berbee.com
Thu Jan 20 10:52:34 EST 2005


Also check under the CM service parameters to see if H.323 fast-start is
on.  I've seen some compatibility issues with this feature and non-Cisco
devices. 

-----Original Message-----
From: Nick Marus [mailto:nmarus at gmail.com] 
Sent: Thursday, January 20, 2005 9:47 AM
To: Walenta, Phil
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Re: dtmf on h.323 truck to avaya Definity
s8700

S8700 is listed under gateways.

Turned off "Wait for far end H.245". Having the same outcome though. 

I am running a trace to see if anything else is apparent.

Nick


On Wed, 19 Jan 2005 21:34:00 -0600, Walenta, Phil
<philip.walenta at berbee.com> wrote:
> This sounds like a DTMF in-band, out-of-band issue.   Just out of
> curiosity, are the S8700's listed under gateways or trunks in CM?
> 
> If you're using it under trunk, it should only be done with a 
> gatekeeper involved.
> 
> If it is listed as a gateway, see if the "Wait for far end H.245" box
is
> checked.  If it is, uncheck it.   It may be the Definity system wants
to
> see what the CM has to offer.
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
> Sent: Wednesday, January 19, 2005 7:23 PM
> To: Nick Marus
> Cc: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Re: dtmf on h.323 truck to avaya Definity s8700
> 
> Can you get a CCM trace (detailed debug trace level) of both calls?
> The info in the Setup and H.245 negotiation should show the problem.
> 
> -Ryan
> On Jan 19, 2005, at 3:07 PM, Nick Marus wrote:
> 
> > hey all,
> >
> > got a quick weird one.
> >
> > I just built a h323 connection between an Avaya s8700 Definity and a

> > Cisco Callmanager 4.1.
> >
> > Everything is working fine except that when I initiate a call to the

> > s8700 from the callmanager my dtmf tones are not heard by either
end.
> > likewise the dtmf from s8700 is not heard by me.
> >
> > If the s8700 initiates the call to the callmanager, dtmf works both 
> > ways.
> >
> > I have the s8700 set up as a h323 gateway in the callmanager, so no 
> > other hardware is in play.
> >
> > --
> > Nick Marus
> > nmarus at gmail.com
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


--
Nick Marus
nmarus at gmail.com



More information about the cisco-voip mailing list