[cisco-voip] Home Cisco PSTN POTS Gateway

[Hering, Marc]

Ok,,important safety tip thanks Egon :)


I'll check that out,   I didn't even think about the DSP resources....
Worst case I'll pick up a 1760V on the 'Bay! :) 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of John Osmon
Sent: Tuesday, January 25, 2005 2:06 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Home Cisco PSTN POTS Gateway

On Tue, Jan 25, 2005 at 01:18:57AM -0500, Hering, Marc wrote:
> I think he just needs some FXO/FXS ports depending on what he wants to

> do.  I have a 1720 router at home with a 2924 switch and I am just
going
> to toss a FXO card in it so I can play....   

Check to make sure you can use the 1720 -- I know that some of the 17xx
series don't recognize VICs.  Also make sure that you have the DSP
resources installed.  We once ordered a 1750 for an applicaiton where we
already had some VICs -- but it was ordered with out the DSP card...
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip