[cisco-voip] Re: Callmanager Maximum Active Calls
Ryan Fields
jryan.fields at gmail.com
Mon Jan 31 05:05:02 EST 2005
Hi,
Let me correct myself. Its "requested circuit unavailable" and "recovery on
timer expiry" on the pabx
Thanks.
On Mon, 31 Jan 2005 17:30:06 +0800, Ryan Fields <jryan.fields at gmail.com> wrote:
> Hi All,
>
> I've got two E1 isdn registered on a single callmanager 3.1(2c) and
> a pabx/predictive dialer configured on the other end.
> At the end of the day, calls could not go through anymore.
> On the Pabx, I get "requested circuit unavailable" and "disconnect
> timer expiry"
>
> The cisco event log gives an error "Maximum Active calls reached".
> I had to restart the callmanager service to get calls goin again.
>
> What is the maximum active call value for the callmanager,
> is there anyway to increase it?
>
> If this is an improper disconnect or disconnect timer issue between
> the dialer/pabx and callmanager, what other settings can I tweak on
> callmanager for it to clear calls that may have hung?
>
> Thanks
> Ryan
>
More information about the cisco-voip
mailing list