[cisco-voip] CCM and QOS
Phillips, Danny
dphillips at sapc.edu
Fri Jul 1 09:10:13 EDT 2005
Below is the settings on my 3550 when I turned on "auto QOS". When I
look at the interface using the show interface command, the queuing says
that it is fifo. My question is should I turn this off using the
"fair-queue" command?
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport trunk native vlan 31
switchport trunk allowed vlan 31,231
switchport mode trunk
switchport voice vlan 231
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
wrr-queue bandwidth 10 20 70 1
wrr-queue min-reserve 1 5
wrr-queue min-reserve 2 6
wrr-queue min-reserve 3 7
wrr-queue min-reserve 4 8
wrr-queue cos-map 1 0 1
wrr-queue cos-map 2 2 4
wrr-queue cos-map 3 3 6 7
wrr-queue cos-map 4 5
priority-queue out
spanning-tree portfast
spanning-tree bpduguard enable
end
Danny
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050701/2a4256e7/attachment.html
More information about the cisco-voip
mailing list