[cisco-voip] Change "Redirecting Number" Calling Plan/Type

[Andrew Dignan]

You have to disable G.729 support by adding the following registry in
order for it to invoke a transcoder:

HKEY_LOCAL_MACHINE\SOFTWARE\Active Voice\AvSkinny "G729
Enabled"=dword:00000000

Unless there is a better way to do it.

[digger]


> I need to change the calling numbering plan and type for the "redirecting
> number".  However, this is an MGCP implementation so I can't use the "isdn
> map address" command or translation rules.  In the CM gateway config you
> can set it for the calling number but nothing for the redirecting number.
> Any ideas...and going to h.323 isn't really an option.
>
> Have had a case open with Verizon for a week now and finally got them to
> look at the isdn messages as to why RDNIS wasn't being recieved (we are
> sending it out but has numbering plna of unknown/unknown).  They said they
> need it to be national/isdn in order for them to pass it on.
>
> TIA,
>
> Andy
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>