[cisco-voip] Change "Redirecting Number" Calling Plan/Type

[Erick Bergquist]

With MGCP, it can't be done right now for the regular
calling/called party number either unless you have
multiple gateways. Each gateway has different setting
Thats the workaround in bug id (feature request?) on
this, CSCdt68985. Looks like you may need to get a
seperate feature request filed to get options added
for redirecting number settings.

To me, they should move this to the route pattern
settings and not on the gateway config page. I hate
having to reset a gateway to change plan/type setting
or calling ID number. 

--- Andrew Dignan <andy at dignans.com> wrote:

> I need to change the calling numbering plan and type
> for the "redirecting
> number".  However, this is an MGCP implementation so
> I can't use the "isdn
> map address" command or translation rules.  In the
> CM gateway config you
> can set it for the calling number but nothing for
> the redirecting number. 
> Any ideas...and going to h.323 isn't really an
> option.
> 
> Have had a case open with Verizon for a week now and
> finally got them to
> look at the isdn messages as to why RDNIS wasn't
> being recieved (we are
> sending it out but has numbering plna of
> unknown/unknown).  They said they
> need it to be national/isdn in order for them to
> pass it on.
> 
> TIA,
> 
> Andy
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



		
____________________________________________________
Sell on Yahoo! Auctions – no fees. Bid on great items.  
http://auctions.yahoo.com/