[cisco-voip] Conf bridge...using 6608.

[ALI Rijas Mannanthara]

Hi All,

 

I have a PUB and a SUB CCM at my CO and branch office  ....for conf  at
CO I use 6608-one of the E1 (7/1)and for branch office too I use one
another (7/2) of the same blade .

 

Now I am trying to put a new 6608 blade at branch office and register
the port to a new Cnf bridge eg 6/1 of the new 6608 on my SUB CCM as
branch do not have to come to CO for conf .

 

But the port I configure and I am able to ping the IP of the 6/1 but not
getting registered with SUB as well as PUB CCM.

 

Please help....

 

Thanks ,

 

Rijas

EPBX : 6226

VoIP : 248-994-4858

 

This E-Mail is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential, and exempt from disclosure. If the reader of this document
is not the intended recipient or an employee or agent responsible for
delivering this document to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
document is strictly prohibited. If you have received this document in
error, please delete it. Thank you. 

 

Confidentiality Statement:

This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, please note that you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by return email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050602/714caf2f/attachment.html