[cisco-voip] connecting Least Cost Router to CME / VoIP gateway

[Erik Erasmus]

Hi 

 

Does anyone have experience connecting a least cost router to a VoIP
gateway. These devices are popular in some parts of the world where
people intercept outbound calls from cell phones and re-directing these
calls via a GSM Least Cost router instead of over the standard PSTN.

 

I believe people connect the LCR device (which looks like a modem and
has a SIM card in it) to standard analogue extension ports on a PBX. I
now want to connect the LCR to an FXS port on a router. I believe the
LCR will need digits passed on to it to make the outbound call via GSM.
What is the correct way to do this.

 

Any advice will be appreciated.

 

Erik Erasmus


This message, including any attachments is intended only for
the persons or entity to which it is addressed, and may 
contain privileged or confidential information. Retransmission, 
dissemination, copying, distribution, modification and / or 
publication of this message by a person other than the intended 
recipient is strictly prohibited by the sender. If you have 
received this message in error, or you feel it is unacceptable 
communication, a chain letter or offensive material of any nature, 
please delete the material and any copies from all systems and 
report it to: 

info at kss.co.za
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050609/30a5ed18/attachment.html