[cisco-voip] CCM - ad hoc conference
Lelio Fulgenzi
lelio at uoguelph.ca
Fri Jun 10 11:29:38 EDT 2005
Something to add to this. There is also a rule that calls cannot span resources, so, the max participant value is used when assigning a conference call to a resource. If there is not at least <max participant> spaces available on a resource, it will not use it. The danger in upping the value to 16 is that you can end up wasting resources - there could be 15 calls available on a resource (almost half!) but because you can not have 16 calls, the potential max, it will skip to the next resource.
----- Original Message -----
From: Lelio Fulgenzi
To: cisco-voip at puck.nether.net
Sent: Friday, June 10, 2005 11:25 AM
Subject: Re: [cisco-voip] CCM - ad hoc conference
If you are using software resources - you'll have to find out what the max of a server is - they suggest not using a publisher or subscriber for that.
If you are using hardware resources, I opened a case about this. The 'official' stance is max 6 participants for a 6608 and 3.3.X and 16 for a 6608 and 4.1.X. However, when I contacted the TAC they said you could put as many as you want up to 32.
From Cisco CallManager System Guide, Release 4.1(3) - Cisco DSP Resources for Transcoding, Conferencing, and MTP
a.. For a G.711 or G.723 conference-32 conferencing participants per physical port; maximum conference size of 16 participants
b.. For a G.729 conference-24 conferencing participants per physical port; maximum conference size of 16 participants
From Cisco CallManager System Guide, Release 3.3(4) Cisco Catalyst DSP Resources for Transcoding and Conferencing
Cisco Catalyst Voice Modules PSTN Gateway Sessions Conferencing Sessions MTP Transcoding Sessions
Catalyst 4000 WS-X4604-GWY
G.711 only
.96 calls
G.711 only
.24 conference participants
.Maximum of 4 conferences of 6 participants each
To G.711
.16 MTP transcoding sessions
Catalyst 6000 WS-6608-T1 or WS-6608-E1
WS-6608-T1
.24 calls per physical DS1 port
.192calls per module
WS-6608-E1
.30 calls per physical DS1 port
.240calls per module
G.711 or G.723
.32 conferencing participants per physical port
.Maximum conference size of 6 participants
G.729
.24 conferencing participants per physical port
.Maximum conference size of 6 participants
The following capacities also apply to simultaneous transcoding and conferencing:
G.723 to G.711
.32 MTP transcoding sessions per physical port
.248sessions per module
G.729 to G.711
.24 MTP transcoding sessions per physical port
.192sessions per module
----- Original Message -----
From: Vincent De Keyzer
To: cisco-voip at puck.nether.net
Sent: Friday, June 10, 2005 8:51 AM
Subject: [cisco-voip] CCM - ad hoc conference
Hi list,
what is a reasonable limit for the maximum number of attendees to an ad hoc conference on the CCM ?
I have a customer that would like to go up to 8 to 10 attendees, and the default limit is 4. Is there a risk for CCM, the gateway or something else?
Vincent
----------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050610/ccbce7e7/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 43 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20050610/ccbce7e7/attachment-0001.gif
More information about the cisco-voip
mailing list