[cisco-voip] CCM IP Address for MGCP Endpoint display issue/bug in 4.02a

[Erick Bergquist]

Anyone else run into this little issue which appears
to be a cosmetic/display issue with CCM Admin. 

Have a 2800 ISR with 12.4(1) IOS and CCM 4.0(2a)SR1a
and in CCM Admin under Device -> Gateway the MGCP
Endpoint IP address displays the IP address of router
packets leave, even though router has MGCP Bind
commands for ethernet and is using them. a netstat -an
on server shows the routers ethernet address bound to
MGCP ports, and a show tcp brief on gateway shows the
ethernet IP address. 

If I re-enter the mgcp bind commands it clears up on
the CCM side. Yet a no mgcp, then mgcp will cause the
wrong IP to be displayed on CCM side until the bind
commands are re-entered as they were.

Erick



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new Resources site
http://smallbusiness.yahoo.com/resources/